Fumed oak 92 x 4/18 x 600mm brushed and oiled parquet flooring

Description

Fumed oak 92

Introducing a wide and longer herringbone board we have a well sought-after smoked finish to add to its appeal. The warm colours of the smoking process provide a beautiful finish and the stylish design to top it off.

Plank Width	92mm
Plank Length	600mm
Thickness	4/18mm
Finish	Fumed, Brushed & Oiled
Specie	Oak
Grade	Classic
Construction	Engineered Parquet, Mirco-Bevelled Edges
Profile	Tongue & Groove
Warranty	20 years (Residential)
Underfloor Heating	Yes Suitable

Fumed oak 92

Engineered wood flooring consists of two or more layers of wood adhered together to form a plank. Typically, engineered wood flooring uses a thin layer (lamella) of a more expensive wood bonded to a core constructed from cheaper wood. The increased stability of engineered wood is achieved by running each layer at a 90° angle to the layer above. This stability makes it a universal product that can be installed over all types of subfloors above, below or on grade. Engineered wood is the most common type of wood flooring in Europe and has been growing in popularity in North America

Tongue-and-groove  One side and one end of the plank have a groove, the other side and end have a tongue (protruding wood along an edge’s center). The tongue and groove fit snugly together, thus joining or aligning the planks, and are not visible once joined. Fumed oak 92 tongue-and-groove flooring can be installed by glue-down (both engineered and solid), floating (engineered only), or nail-down (both solid and engineered).

Floor finishes

Brushed and oiled – Steel brushes are used in the direction of the grain which opens up the surface of the wood and removes splinters. The wood is then oiled.

Oil – Oiled floors have existed for several thousand years and is the most common floor finish used globally. Oils used for floor finishing are natural drying oils of vegetable origin that are not to be confused with petroleum based oils and contain no VOCs. Pre-finished oil floors can be UV cured.

Lacquered – Lacquered floors tend to be more durable and resilient to scratching, the lacquer provides a flat and smooth finish to the wood flooring.

Additional information