COMING SOON: 10

Engineered wood flooring consists of two or more layers of wood adhered together to form a plank. Typically, engineered wood flooring uses a thin layer (lamella) of a more expensive wood bonded to a core constructed from cheaper wood. The increased stability of engineered wood is achieved by running each layer at a 90° angle to the layer above. This stability makes it a universal product that can be installed over all types of subfloors above, below or on grade. Engineered wood is the most common type of wood flooring in Europe and has been growing in popularity in North America

Tongue-and-groove One side and one end of the plank have a groove, the other side and end have a tongue (protruding wood along an edge’s center). The tongue and groove fit snugly together, thus joining or aligning the planks, and are not visible once joined. COMING SOON: 10 Tongue-and-groove flooring can be installed by glue-down (both engineered and solid), floating (engineered only), or nail-down (both solid and engineered).

COMING SOON: 10

Floor finishes

Brushed and oiled – Steel brushes are used in the direction of the grain which opens up the surface of the wood and removes splinters. The wood is then oiled.

Oil – Oiled floors have existed for several thousand years and is the most common floor finish used globally. Oils used for floor finishing are natural drying oils of vegetable origin that are not to be confused with petroleum based oils and contain no VOCs. Pre-finished oil floors can be UV cured.

Lacquered – Lacquered floors tend to be more durable and resilient to scratching, the lacquer provides a flat and smooth finish to the wood flooring.

INSTALLATION AND WARRANTY All woodfloors4u floor must be installed by a competent installer who will have the necessary skills and take

Individual site circumstances into account. Woodfloors4u warranty will apply only to floors which have been installed by a competent flooring installer

comparable to BS8201 in the UK or equivalent standards worldwide. Moisture tests of areas including subfloor will be required for warranty.