Description
Natural oak 190
One of our selected products for quality and cost effectiveness is our lacquered 3/14mm oak. Containing all the natural beauty of the wood and sealed with several layers of lacquer providing a smooth finish.
| Plank Width | 190mm |  |
| Plank Length | Fixed Lengths 1.9m | |
| Thickness | 3/14mm | |
| Finish | Natural, Lacquered | |
| Specie | Oak | |
| Grade | Classic | |
| Construction | Engineered Plank, Mirco-Bevelled Edges | |
| Profile | Tongue & Groove | |
| Warranty | 20 years (Residential) | |
| Underfloor Heating | Yes Suitable |
Natural oak 190
Engineered wood flooring consists of two or more layers of wood adhered together to form a plank. Typically, engineered wood flooring uses a thin layer (lamella) of a more expensive wood bonded to a core constructed from cheaper wood. The increased stability of engineered wood is achieved by running each layer at a 90° angle to the layer above. This stability makes it a universal product that can be installed over all types of subfloors above, below or on grade. Engineered wood is the most common type of wood flooring in Europe and has been growing in popularity in North America
Tongue-and-groove One side and one end of the plank have a groove, the other side and end have a tongue (protruding wood along an edge’s center). The tongue and groove fit snugly together, thus joining or aligning the planks, and are not visible once joined. Natural oak 190 Tongue-and-groove flooring can be installed by glue-down (both engineered and solid), floating (engineered only), or nail-down (both solid and engineered).
Natural oak 190
Floor finishes
Brushed and oiled – Steel brushes are used in the direction of the grain which opens up the surface of the wood and removes splinters. The wood is then oiled.
Oil – Oiled floors have existed for several thousand years and is the most common floor finish used globally. Oils used for floor finishing are natural drying oils of vegetable origin that are not to be confused with petroleum based oils and contain no VOCs. Pre-finished oil floors can be UV cured.
Lacquered – Lacquered floors tend to be more durable and resilient to scratching, the lacquer provides a flat and smooth finish to the wood flooring.
In line with industry Standard packs may contain one split starter plank to assist with the stagger.
Sharminder –
Look good down but noticeable when scratched
Salim –
Staff were very helpful with all quires I had and made the whole process easy